AirSep Self-Contained Oxygen Generators
AirSep self-contained oxygen generators are compact PSA units with a built-in air compressor, ideal as a feed gas source for smaller ozone generators, supplied by Ozone UV Solutions in Australia, with worldwide shipping. Apart from the Centrox, they need no special installation: connect the oxygen outlet, plug into a grounded power outlet, switch on and set the flow.

Models and specifications
| Model | Flow SCFH | Flow Nm³/h | Flow LPM | Pressure psig | Pressure kPa | Pressure barg |
|---|---|---|---|---|---|---|
| Onyx | 10 | 0.3 | 5 | 9 | 62 | 0.62 |
| Onyx Ultra | 21 | 0.55 | 10 | 20 | 138 | 1.37 |
| Topaz | 12 | 0.31 | 6 | 9 | 62 | 0.62 |
| Topaz Ultra | 21 | 0.55 | 10 | 20 | 138 | 1.37 |
| Reliant | 17 | 0.44 | 8 | 50 | 345 | 3.5 |
| Centrox | 32 | 0.84 | 15 | 50 | 345 | 3.5 |
The Centrox requires installation. Centrox-CR is also available as a cylinder refilling station; contact us for details.
SCF measured at 1 atmosphere and 70°F. Nm³ measured at 1 atmosphere and 0°C.
Specifications subject to change without notice.
Models

AirSep Topaz
AirSep Topaz Ultra
AirSep Onyx

AirSep Onyx Ultra

AirSep Reliant

AirSep Centrox

AirSep Centrox-CR
Frequently asked questions
Do self-contained AirSep generators need a separate compressor?
No. They have a built-in air compressor, so they only need a grounded power outlet.
Which model suits a small ozone generator?
The Topaz and Onyx series are common choices for smaller ozone generators. Send us your ozone generator model and we will confirm the right unit.
What is the difference between the standard and Ultra models?
The Ultra models deliver a higher oxygen flow (21 SCFH) at a higher pressure (20 psig) than the standard Topaz and Onyx.
Not sure which model fits? We recommend, install and service AirSep across Australia.
Talk to our Principal Engineer
Jonathan Andry, Founder
Send us your enquiry or call +61 422 081 913.

